Fill Kits and Accessories

Field Service Kit for Gas Shocks

Don’t let the ride end early: Keep going with an authentic ORI Field Service Kit, featuring everything you need to service your struts in the field (or on the trail). Includes a sturdy carrying case to keep your extra supplies safe and organized.

Content List | Shipping Wt.: 48 lbs.
(1) PA-162B Dual-Fill Kit 600 psi
(1) Fitted Lift-Out Tray for Tools & Parts
(4) Schrader Filler Valve Assemblies
(2) Spherical Bearings
(1) Valve Connector
(1) Quick Change Coupler—High Pressure
(1) 800 psi Nitrogen Regulator
(1) 20 cu. ft. Nitrogen Cylinder (empty)
(1) Calibrated Valve Core Torque Wrench
(1) EZ-Fill Kit (add/remove oil syringe)
(1) 7/16” Short Combination Wrench
(1) 11/16” Short Combination Wrench
(1) Stubby Slot Screwdriver – Proto
(1) 10” Adjustable End Wrench – Proto
(1) Teflon Tape Roll (1/2” x 520”)
(1) 6 ft. Stanley Measuring Tape (to set ride height)
(1) Rugged Foam-Fitted Carry Case
Water-Tight (Nema-6 Enclosure)
(4) 1/2” High Misalignment Spacers
(4) 5/8” Misalignment Spacers
(1) 1L Bottle 5w Cartridge Fork Oil

Field Service Kit for Gas Shocks
Field Service Kit for Gas Shocks
ORI Dual-fill Nitrogen Fill Kit

ORI Dual-fill Nitrogen Fill Kit

Your off-road adventures can proceed in perfect balance with the ORI Dual-Fill Nitrogen Fill Kit.

ORI Dual-Fill Nitrogen Fill Kits are even compatible with other name-brand suspension systems and can be used in a pinch to inflate your tires.

Dual-Fill kit features:

  • Stainless steel, oil-fillable gauge with a 600 psi range (1,000 psi available upon request).
  • Direct pressure to a single shock or balance two shocks at the same time to significantly reduce setup time.
  • Zero-loss connection valves to fill shock with no loss of pressure
  • Two 5-foot stainless braided hoses to reach between right and left side shocks for simultaneous fill.
  • 3-foot stainless steel braided hose connects to the nitrogen source
  • Easy pressure bleeding with a relief valve
  • Option of blocking the source to bleed pressure from the shocks
  • Zero-loss connectors fit ORI Struts and most other name-brand shocks, coil-overs and external bump stops that use Schrader-type filler connection.
ORI Single-fill Nitrogen Fill Kit

ORI Single-fill Nitrogen Fill Kit

Keep your ORI Struts working at the peak of their performance with the ORI Single-fill Nitrogen Fill Kit.

ORI Single-fill Nitrogen Fill Kits are even compatible with other name-brand suspension systems and can be used in a pinch to inflate your tires.

  • Single-fill kit features:
  • Stainless steel, oil-fillable gauge with a 600 psi range (1,000 psi available upon request).
  • Zero-loss connection valve to fill shock with no loss of pressure
  • 2-foot stainless steel braided hose connects to the nitrogen source
  • Easy pressure bleeding with a relief valve
  • Option of blocking the source to bleed pressure from the shocks
  • Zero-loss connectors fit ORI Struts and most other name-brand shocks, coil-overs and external bump stops that use Schrader-type filler connection.

Need twice the fill? Check out our ORI Dual-fill Fill Kit above.

EZ-Fill Kit

EZ-Fill Kit

Quickly and easily add or remove shock oil through the Schrader valve—no mess!

  • EZ-Fill Kit features:
  • Add oil for stiffer spring rate.
    Remove oil for softer spring rate.

For more detail see the guide.

Gauge with short connection
Gauge with 12 inch hose

Gauges

ORI has two available gauge options for checking shock or strut pressures without the risk of pressure loss during connection. Specify Gauge with Short Connection, or Gauge with 12-inch hose.
Nitrogen Regulator RHP800 with Quick-Change Coupler

Nitrogen Regulator RHP800 with Quick-Change Coupler

0-800 PSI Delivery Pressure

Quick-Change Coupler Assembly Includes:

Male/Female Couplers & Stainless Nipple

Vent Valve

Vent Valve

Upgrade Schrader valve vent with this easy-to-use 3000 psi vent valve. Attaches to older the Single-Fill and Dual-Fill nitrogen fill kits.

Fill Valve 12 inche Hose Extension

Fill Valve 12” Hose Extension

Relocate Schrader Valve for Easy Access

  • Remove Schrader fill valve.
  • Install either of two provided fittings to the open 1/8 NPT fill valve port on your strut.
  • Attach swivel end of hose to fitting. Do not overtighten!
  • Secure hose loose end for easy access to your fill valve.